Killer bee: My Yaris LB (PICS)

[redduck]

Originally Posted by tk-421

A couple of questions:

1. Which process did you use for painting (sanding, primer, etc?)
2. Do the painted parts get sticky when it's hot/sunny?

TIA

I can answer these I do more interior work than anything.

the interior is no different than the exterior painting wise.

for a plastic piece:
wet sand with 200 grit sand paper.
allow to fully dry then wipe with alcohol to remove any remaining dust
spray with sand-able primer allow to dry for at least and hour
wet sand with 1000 grit and paper
allow to dry wipe with alcohol
apply paint color of choice in swift long lite coats, several lite coats are better than 2 heavy coats. allowing each coat about ten minutes to dry.
allow to fully dry
apply UV resistant clear coat in the same manner is you did when painting.
allow to dry for at least 24hrs before installing them back into the car.
if you want a shine buff with a buffing compound.

or option
if you want to rid the piece of texture and make it smooth like the exterior of the car
sand with 80 grit sand paper
apply a filler called dolphin glaze.
allow to fully dry
sand to a 2000 grit finish
apply a coat of primer
if there are more imperfections add another layer of dolphin glaze to the imperfection not the whole piece!
repeat previous 3 steps until the piece is flawless
now apply paint the same as above.

**painted pieces will get dirtier than people think its a constant finger print battle.