electric water pump help! - Toyota Yaris Forums

severous01 · 10-23-2009, 04:57 PM

because the stock pump doesnt come apart like that. my ltx camaro is that way, the impeller has 6 or 8 small bolts that hold it on, and the electric simply bolts onto stock housing.

but then again, this is the design of chevy, not toyota. and as far as i know, toyota isn't too happy about putting non-yota parts on their cars. the aftermarket seems to be lacking in anything that's performance related. anything program, internal engine,

timing, cooling, and suspension (other than easy stuff like springs/shocks). i know it's not apples and apples, but the camaro i have is completely not stock short of block and body pannels. everything else is tube steel, cf or fiberglass...and definitely 90% aftermarket. i have tubular upper and lower control arms, custom shocks, vette brakes, tubular engine cradle, aluminum rear lower control arms and panhard rod, tubular torque arm, aftermarket axle, lexan and fiberglass hatch, CF interior panels and dash, fiber hood, hella 90mm projector headlights, even the engine is aftermarket (except the block itself).

the only thing i can think of that's not stock on my car is the chassis and carpet, seats, trans case, engine block (just the block) ECM and wiring, tail lights, doors, windows and windshield...and i think that's it.

any way, sorry to go off tangent.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drinking from the black pump	XOG	Performance Modifications	1	04-20-2007 05:49 PM
sum dude asked if my car was electric...	Blenjar	General Yaris / Vitz Discussion	17	01-12-2007 10:39 PM
what water temp does cooling fan turn on	gonzo452001	General Yaris / Vitz Discussion	10	11-07-2006 05:50 AM
[Detail] [as to make ] Auto Laudering	Sérgio Barros	Wash, Wax, Detailing, Exterior Repairs	4	08-22-2006 03:56 AM

10-23-2009, 04:57 PM	#37
severous01 Drives: 2008 yaris, stripped, red Join Date: Jan 2009 Location: SE Texas Posts: 977	because the stock pump doesnt come apart like that. my ltx camaro is that way, the impeller has 6 or 8 small bolts that hold it on, and the electric simply bolts onto stock housing. but then again, this is the design of chevy, not toyota. and as far as i know, toyota isn't too happy about putting non-yota parts on their cars. the aftermarket seems to be lacking in anything that's performance related. anything program, internal engine, timing, cooling, and suspension (other than easy stuff like springs/shocks). i know it's not apples and apples, but the camaro i have is completely not stock short of block and body pannels. everything else is tube steel, cf or fiberglass...and definitely 90% aftermarket. i have tubular upper and lower control arms, custom shocks, vette brakes, tubular engine cradle, aluminum rear lower control arms and panhard rod, tubular torque arm, aftermarket axle, lexan and fiberglass hatch, CF interior panels and dash, fiber hood, hella 90mm projector headlights, even the engine is aftermarket (except the block itself). the only thing i can think of that's not stock on my car is the chassis and carpet, seats, trans case, engine block (just the block) ECM and wiring, tail lights, doors, windows and windshield...and i think that's it. any way, sorry to go off tangent.