Connecting wiring to small trailer

[marco2011]

Originally Posted by CTScott

No, you would need this type, as you need to combine the tail, stop and turn lights together for the 4 pin trailer harness.

http://www.autozone.com/autozone/cat...questid=108197


For 07-08
On the taillight connectors (J3-Right, J4-Left):
Attachment 26764

Stop: J3,J4 - Pin5 (purple-LH side, orange-RH side)
Tail: J3,J4 - Pin 4 (green-LH side, gray-RH side)
Reverse: J3,J4-Pin1 (red LH-side, brown-RH side)
Ground: J3,J4-Pin6 (white w/black stripe)
Turn-Left: J4-Pin3-LH (green)
Turn-Right: J3-Pin3-RH (yellow)



For 09:
On the taillight connectors (J34-Right, J35-Left):
Attachment 26765

Stop: J34,J35 - Pin1 (purple-LH side, orange-RH side)
Tail: J34,J35 - Pin 4 (green-LH side, gray-RH side)
Reverse: J34,J35-Pin5 (red LH-side, brown-RH side)
Ground: J34,J35-Pin6 (white w/black stripe)
Turn-Left: J35-Pin2-LH (green)
Turn-Right: J34-Pin2-RH (yellow)

Im running in a problem!

I followed your diagram, and a strange thing happen!

Everything is working fine, but on the moment i put on the tail light on the car, the blinker (left) (right) go off!.
Im ussing the taillight converter

Toyota yaris 2006