Connecting wiring to small trailer

[marco2011]

Originally Posted by CTScott

No, you would need this type, as you need to combine the tail, stop and turn lights together for the 4 pin trailer harness.

http://www.autozone.com/autozone/cat...questid=108197


For 07-08
On the taillight connectors (J3-Right, J4-Left):
Attachment 26764

Stop: J3,J4 - Pin5 (purple-LH side, orange-RH side)
Tail: J3,J4 - Pin 4 (green-LH side, gray-RH side)
Reverse: J3,J4-Pin1 (red LH-side, brown-RH side)
Ground: J3,J4-Pin6 (white w/black stripe)
Turn-Left: J4-Pin3-LH (green)
Turn-Right: J3-Pin3-RH (yellow)



For 09:
On the taillight connectors (J34-Right, J35-Left):
Attachment 26765

Stop: J34,J35 - Pin1 (purple-LH side, orange-RH side)
Tail: J34,J35 - Pin 4 (green-LH side, gray-RH side)
Reverse: J34,J35-Pin5 (red LH-side, brown-RH side)
Ground: J34,J35-Pin6 (white w/black stripe)
Turn-Left: J35-Pin2-LH (green)
Turn-Right: J34-Pin2-RH (yellow)

Im running in a problem!

I followed your diagram, and a strange thing happen!

Everything is working fine, but on the moment i put on the tail light on the car, the blinker (left) (right) go off!.
Im ussing the taillight converter

Toyota yaris 2006

[CTScott]

Originally Posted by marco2011

Im running in a problem!

I followed your diagram, and a strange thing happen!

Everything is working fine, but on the moment i put on the tail light on the car, the blinker (left) (right) go off!.
Im ussing the taillight converter

Toyota yaris 2006

So, all of the functions work independently, but when both the tail lights and one of the blinkers are turned on, the blinker doesn't light, but the tail does?

[marco2011]

Originally Posted by CTScott

So, all of the functions work independently, but when both the tail lights and one of the blinkers are turned on, the blinker doesn't light, but the tail does?

Stupid me!

I bought a trailer-wire tester at canadian Tire (its a little plug what you can put into the 4-way plug car-side, what has little lets on it shows you the tail-light, and turning signals blink up on test). but but but, those test plugs dont work!!! i was already figuring for 1 day..how come how come it doesnt work!.

thyen decided to use a normal volt tester, and it just shows that it is working!

No Taiwan testers for me anymore