 |
 |
|
|
|
|
08-01-2007, 03:35 PM
|
#1 |
  Drives: 2007 Yaris HB Join Date: Apr 2007
Location: my own little world
Posts: 1,256
|
Installation...is it simple?
If I were to replace just one of these, which would be most beneficial? Help me Jebus, I can't stop modding!  
|
|
|
08-01-2007, 07:35 PM
|
#2 | |
|
Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006
Location: USA
Posts: 1,097
|
Quote:
The WP-Lite and ALT-Lite pulleys will be sold as a pair and will not be offered individually. I don't recommend installing one without the other as the gains from just one would be minimal. They are meant to be used as a pair for optimum weight reduction in the rotating assembly. Join the GB and get both at a considerable discount, you won't be disappointed. |
|
|
|
|
08-01-2007, 07:38 PM
|
#3 |
|
I used to have 1700 posts
|
its as simple as installing the crank pulley right?
__________________
First Boosted Yaris On The East Coast 
|
|
|
|
08-01-2007, 09:54 PM
|
#4 | |
|
Drives: Yaris 3 Door, 04 WRX, 69 Lotus Join Date: Apr 2007
Location: norcal
Posts: 128
|
Quote:
More bolts, but far less torque. On my DSM, the WP pulley was tough cause it was kinda wedged between the engine and mount lol. Will the colours match your other products? And a 2nd to the underdrive-ness question... |
|
|
|
|
08-01-2007, 11:46 PM
|
#5 | |
|
Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006
Location: USA
Posts: 1,097
|
Quote:
Colors will match. Same shades of Red, Blue, and Graphite Gray. As stated before, these are part of our -Lite series. These pulleys are OEM diameter pulleys. In my near decade of working nearly 24/7 with pulleys, I have found that Underdriving is properly done when it can be done via an Underdrive Crank Pulley. As we have discussed before, building an Underdrive Crank Pulley for the Yaris has proven to be rather difficult because of the way the crank case has been designed on this engine. It is something that we are looking into... These WP-Lite and ALT-Lite Pulleys should be a nice addition to the CR-Lite Crank Pulley many of you already own. You asked for them, and we did the R&D for them. Now it is time for you guys to show real support for your favorite aftermarket company 
|
|
|
|
|
08-04-2007, 03:25 AM
|
#6 |
|
Toyota Newb!!
Drives: Yaris S Sedan w/ Aero Package! Join Date: Jun 2006
Location: Toronto
Posts: 228
|
There ya go! Ok..we are passed 14 people...so price will be even LOWER right?? LOL...j/k..
OK...but seriously...START collecting $$ so you can START shipping! Heh heh...can you tell i really want this?? How's that for showing some NST support? Oh yeah...think you can put in some NST decals/stickers in my order? I didn't get anything with the CR-lite. |
|
|
|
08-04-2007, 03:59 AM
|
#7 |
|
|
0. ChinoCharles
1. nqd (red) 2. RedToyotaYaris (red) p. Black Yaris (blue) 4. Doc Zaius (red) 5. OxyG3nE (blue) 6. Astroman (red) 7. REZNUNT (red) 8. sdmf (red) 9. bubaa (red) 10. Terrorize (blue) 11. Kurokoma-kun (blue) 12. Jerkratt (Blue) my 07 maybe dead but the 08's coming! 13. tmyers82 (Blue) 14. lostmind (undecided, gray maybe?) 15. CASTREX (Blue) 16. me_ver51 (gray) |
|
|
|
08-04-2007, 04:07 AM
|
#8 |
Drives: '07 Blazing Blue LB, '09 Jetta Join Date: May 2007
Location: SoCal
Posts: 413
|
damn..you guys really makin me wanna buy,
but first, what this thing do exactly??...give us in simple word plz. more power?...more torque?
__________________
current: '07 Yaris LB - '09 VW Jetta ex: '06 Beetle S(19x8.5 Audi A8) - MK4 GLi BMP(18x8 OZ, K04) - '03 GTi(17x7.5 Ronal, APR93) - '01 GLS - '88 GTi - '86 GTi - '83 GTi |
|
|
|
08-04-2007, 02:41 PM
|
#9 | |
|
Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006
Location: USA
Posts: 1,097
|
Quote:
These WP-Lite and ALT-Lite Pulleys are roughly 60% lighter than the OEM pulleys they replace. The results of such a modification are: an improvement in throttle response, especially when paired with the CR-Lite (NST09158) Crank Pulley, an upward shift in horsepower and torque curves accross the RPM band, better gas mileage, and more BLING! 
|
|
|
|
|
08-15-2007, 09:21 PM
|
#10 |
|
Modded Moderator
Drives: 07 Toyota Yaris, 71 Galaxie Join Date: Mar 2007
Location: Wenatchee, WA
Posts: 3,670
|
Woohoo! PAID!
|
|
|
|
08-15-2007, 09:44 PM
|
#11 |
Drives: 07 Yaris Liftback Join Date: Jul 2007
Location: California, SoCal
Posts: 161
|
paid
__________________
Toyota Yaris FTFW!! |
|
|
|
08-15-2007, 11:59 PM
|
#12 |
|
Drives: MR2 Spyd/Type R/Yaris/Civic Si Join Date: Feb 2007
Location: Ottawa
Posts: 479
|
Hey,
wow I'm just finding this now provided the 1NZFE hasn't changed (I have an echo) I'd like the two pulleys in blue please (I already have the crank pulley) , I'll PM you about payment etc... campbellwill@hotmail.com Thanks Will |
|
|
|
08-16-2007, 02:46 AM
|
#13 | |
|
Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006
Location: USA
Posts: 1,097
|
Quote:
Thank you very much
|
|
|
|
|
08-17-2007, 01:46 PM
|
#14 |
|
Modded Moderator
Drives: 07 Toyota Yaris, 71 Galaxie Join Date: Mar 2007
Location: Wenatchee, WA
Posts: 3,670
|
NST, could you please update the paid list? I paid, but the list shows I haven't.
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Nonstop Tuning CR-Lite Pulley | ChinoCharles | DIY / Maintenance / Service | 121 | 02-03-2010 06:41 AM |
| NEW GROUP BUY: NST Short Shift Kit (NonStopTuning) | NonStopTuning | NonStopTuning | 245 | 08-28-2007 04:53 PM |
| NEW GROUP BUY: Yaris NST Crank Pulley (NonStopTuning) | NonStopTuning | NonStopTuning | 224 | 05-17-2007 08:40 AM |
| GROUP BUY - NST Crank Pulley | riceboy | Items for Sale by private party | 35 | 12-30-2006 05:03 PM |
| KLight HID Conversion Group Buy!! $165.00 shipped!! | JRT lighting | Sponsors Classifieds Area | 4 | 11-20-2006 11:47 PM |
Hybrid Mode
