DIY 07 Sedan Rear Speaker install

[vodkalush]

10 - (forgot to take pic - but to take off the rear cover simply put you hands under it and start lifting and gently pulling forward; start from one side and work you way to the other side) picture shows what you should see

11 - The stock speaker; remove foam padding.

12 - Disconnect the speaker wire
**
13 - Unscrew speakers (4 screws each speaker)

14 - Since the stock speakers are to big you need to buy/make (since this is diy i made mine) Outline stock speakers onto MDR (not what i used... but its what you should use). I would recommend cutting out the center first, then drill the holes and then finally cut out the spacer/holder.

15 - My finished bracket

16 - Speaker attached to new bracket

17 - Place new speaker into the speaker spot, plug in new speaker (cut off old speaker then splice onto new speaker) then screw down the bracket. Put the foam back on.

18 - Place the "cover" back on. screw the carseat brackets back on. install all of the plastic rivits.

19 - Finally just double check that everything is put back together.*