Does +43mm rub?

[Split]

Originally Posted by kimona

16x7, ET42, 205/50/16 will not rub on stock suspension... front or rear.

suspension has nothing to do with it. it just means the factory springs/shocks have to be compressed an additional 1" before rubbing occurs. if you bottom out aftermarket suspension or factory suspension, you end up at the same height.

[Russelt3hPirate]

Originally Posted by Split

suspension has nothing to do with it. it just means the factory springs/shocks have to be compressed an additional 1" before rubbing occurs. if you bottom out aftermarket suspension or factory suspension, you end up at the same height.

strange. when I changed suspensions I stopped rubbing.

but you're right suspension has nothing to do with wheel fitment.

if you're lowered on aftermarket springs there is a chance you'll rub constantly (FYI, that's bad).

where if you were stock you'd only rub under heavy load.

that's the reason we ask.

some people are ok with little rubbage after serious dips.

Rub constantly = Bad
Rubbing only a little at certain times = ok for some people
not rubbing ever = good.

to determine such things knowing your suspension setup is a factor. :)

and a car on DF210s with a full hatch is very low. :lol: