Relay Wiring for DIY LED Daytime Running Lights (DRL)

[zuberio]

Originally Posted by Lil Abner

zuberio, you could also use a single relay in that setup with 2 diodes. If you put a diode on each "low" and "high" signal wire, then both into the #86 terminal on the relay. But I think it would come down to what parts you have or want to purchase.

Either way, I'll be watching to see what you use for your LED DRLs!

Good catch - why didn't I think of that!?

And to answer your question, here's what I'm using for the LED DRLs.

I'm about 50% done with the wiring .... I just discovered Scotchlok connectors and ordered some off Amazon to make my life easier. I'll post pictures when everything is installed and running :)