Trim Ring depth?

[BEEF]

I went with 1.5" but more because that is what I found. I have been told that 1.75" is the deepest.

I have never actually measured it myself but in my mind, what difference does a quarter of an inch make as long as they actually fit.

you may want to look into center caps as well to complete the look. there are a few different options. I actually thought about colored lug nuts but really didn't know what direction to go other than silver for my car so they stayed stock (and I already had them)

[Jabro]

Originally Posted by BEEF

I went with 1.5" but more because that is what I found. I have been told that 1.75" is the deepest.

you may want to look into center caps as well to complete the look. there are a few different options. I actually thought about colored lug nuts but really didn't know what direction to go other than silver for my car so they stayed stock (and I already had them)

Yeah, I measured 2" but am hesitant to even take the time to try two inch rings considering 1.5" and 1.75" are already tried and tested. Autozone has 15" ones with a weird depth of 1.88" that I will probably give a try, mainly because they're ABS, and I've heard the metal ones can develop an annoying rattle.

As for center caps, I haven't had much luck. I've looked up the Tercel one's on ebay, but a lot of them are being sold either individually or used for fairly high prices considering what they are. Most likely I'll get the trim rings and wait a little bit to see if I can snag some Christmas sales for lugs or caps.

Even without the caps, yours looked pretty darn slick with the paint job.