Installing wheel spacers?

[Jason@SportsCar]

Originally Posted by Lars

So you're telling me that if I unscrew those four bolts that can be seen from the those big holes on the plate where the studs are (I'm guessing that's what you call the hub?) I can just take the hub away from the "wheel" and replace the studs? That's surely good info if I can't make the stud fit somehow.

Just measured the stud. 62 mm, so not very different from the 60 predicted!

Exactly, makes it much easier. *If you have ABS you will need to unplug the wire on the back.

[Lars]

Originally Posted by Jason@SportsCar

Exactly, makes it much easier. *If you have ABS you will need to unplug the wire on the back.

Great, thanks for that. I'm guessing the wire on the back should be easy to spot and unplug, but would you be so kind as to post a picture of that, if possible?