Cheap hesitation or lag fix

[mirageman]

Originally Posted by tmontague

Just finished up doing the mod. Used a piece of clear thin plastic from a product wrapping package. Used super glue and attached it to the module not the actual pedal lever as there is more surface area there. If it falls on and somehow jams the throttle I can just depress the clutch and throw it in neutral so no worries there.

We'll see how well it holds, i'll be driving it in a half hour so it's only had about 2 hrs to cure but seems solid.

Pro tip: when you're down there you might as well tighten up the clutch stop screw. I had about a 1cm play in my clutch pedal and decided to finally finally something about it. 3 quarter turn or so of the 14mm bolt and the play is all gone.

I'll let you all know how I find it, but i'm looking forward to it

OH MAN! Please put that spacer on the lever. It will fall off and wedge that pedal open the day you let someone you love drive that car. YOU know it's there and what to do, but no one else does. While there is less surface area on the lever, there is no tension or pressure moving it anywhere so very little surface area is needed. It is basically resting in place when on the lever.