15 x 7.5 et 30

[KurtRS]

Originally Posted by thebarber

Stretched tires are dumb.

Apparently I need to change how this is written.

175 series tire is almost 7 inches wide. So using the word stretched is not really what I am doing. I like the tread to be a little less then the rim width.

If you lower the car, you will likely rub.

I would go coil overs so likely would only go down an inch.

The main focus of this post was to get the overall diameter the same as factory.......

[suprf1y]

Originally Posted by KurtRS

The main focus of this post was to get the overall diameter the same as factory.......

https://www.tacomaworld.com/tirecalc

[KurtRS]

Originally Posted by suprf1y

https://www.tacomaworld.com/tirecalc

This is the same as the tire calculator I use. Does not take into account the rim width.

This is why I was picking this tire size. Think I would lose the 1% bigger diameter in the sidewall with the wider rims.

https://www.willtheyfit.com/index.ph...7-5&offset2=30