Pre-Hack Repost: DIY Eaton Supercharger, Why Not? - Toyota Yaris Forums

Nexus1155 · 11-18-2008, 08:13 PM

Thanks for the advice Richard, and its good to hear the MAF would be able to handle it...

I will not be making a new intake manifold just utilizing the stock one with a connecting pipe, the air does not need to be direct as it still holds the same pressure charge.... with an intercooler, it will cut down on bends in the pipe work...

but you are right, the mounting will take alot of work if not the most... I have my cardboard and scissor ready ;)

But i still have a couple of recirc valves from an S4 and a small intercooler to boot

This is pretty much what it will look like, might be ghetto, but a supercharger setup that is cheap, would you argue?

11-18-2008, 08:13 PM	#11
Nexus1155 Bathroom + Laptop = <3 Drives: Audi Join Date: Aug 2006 Location: Dorchester Posts: 1,009	Thanks for the advice Richard, and its good to hear the MAF would be able to handle it... I will not be making a new intake manifold just utilizing the stock one with a connecting pipe, the air does not need to be direct as it still holds the same pressure charge.... with an intercooler, it will cut down on bends in the pipe work... but you are right, the mounting will take alot of work if not the most... I have my cardboard and scissor ready ;) But i still have a couple of recirc valves from an S4 and a small intercooler to boot This is pretty much what it will look like, might be ghetto, but a supercharger setup that is cheap, would you argue? Last edited by Nexus1155; 11-18-2008 at 09:06 PM.