Quote:
Originally Posted by Loren
...
Alternately, I think I've seen a Yaris coilover kit that uses a "true coilover" setup in the rear. The stock spring perches aren't used at all, instead, 2.25" ID race spring is used around the shock. Much better solution, I think....
|
That scares and intrigues me at the same time. That is a small single shear bolt at the bottom of that shock.
Undoubtedly a conventional coilover would work better at the limit, but it is just a beam axle in the back so I'm sure you could get 95% there with a good shock/spring setup.
Loren, do your rear K sport shocks have less droop travel than the factory units?
01-23-2009, 03:27 PM
Similar Threads
Threaded Mode