NST & Cali Yaris Come in here!! Pulley Kit and Shifter Kit

[1NZYaris1]

i can sort of help you ,
NST pullies are for the 1NZ-FE(1.5ltr) motor but will also fit the 2NZ-FE(1.3ltr) motor
first off go for the IN CABIN SSk-2 , not the engine bay one.
As far as the NST PULLIES go the alternator looks like it might ,
NST don't have a idiler pullie , and the water pump NST pullie has 3 Bolts
(from memory) not 4 . The crank pullie is not shown in any of your pictures
so cannot comment on that sorry.
hope this helps , and if i am wrong ,some will sure piont it out

[lammy29]

Originally Posted by 1NZYaris1

i can sort of help you ,
NST pullies are for the 1NZ-FE(1.5ltr) motor but will also fit the 2NZ-FE(1.3ltr) motor
first off go for the IN CABIN SSk-2 , not the engine bay one.
As far as the NST PULLIES go the alternator looks like it might ,
NST don't have a idiler pullie , and the water pump NST pullie has 3 Bolts
(from memory) not 4 . The crank pullie is not shown in any of your pictures
so cannot comment on that sorry.
hope this helps , and if i am wrong ,some will sure piont it out

mines like 2SZ-FE.
anyreason y not engine one?
yea im not gud with engine n not sure where the crank is lol where abouts you reckon i can locate it?

[1NZYaris1]

The crank pullie is the lowest pullie on the motor ,and in line
with the centre of the engine, the only real way you are going to know if the NST
pullies will fit is to buy and try , because as stated they are made for the 1NZ-FE which is the same as the 2NZ-FE(just less cc's)
+ NST don't have the idler pullie shown in your photo's.