![]() |
![]()
![]() |
![]() |
#1 |
![]() Drives: 08 Yaris Join Date: Jun 2009
Location: Los Angeles, CA
Posts: 14
|
Which lug nuts for these rims?
I have a set of Konig Monsoons Rims and the stock nugs doesn't fit. I went to autozone and saw a big list of lugs nuts, and I am wondering which one is correct for 08 yaris with these rims? Does anyone know some better brand of these nugs, because autozone one doesn't look like a very high quality stuff. I can get online to order if someone has some suggestion on what exact size fit?
|
![]() |
![]() |
![]() |
#2 |
![]() ![]() Drives: 07 Mazda MX5 Copper Red Join Date: Jun 2009
Location: Melbourne, FL
Posts: 116
|
I like Mcgard spline drive and have had them on a few vehicles...
http://www.mcgard.com/Home/Automotiv...neDriveLugNuts M12x1.5 is the size
__________________
Brent Former Yaris Owner |
![]() |
![]() |
![]() |
#3 |
Reluctantly Crouched...
Drives: 2008 Yaris HB M/T Join Date: Oct 2008
Location: DFW, TX
Posts: 867
|
better to post this in the "wheels and tires" thread
|
![]() |
![]() |
![]() |
#4 |
![]() Drives: 08 Yaris Join Date: Jun 2009
Location: Los Angeles, CA
Posts: 14
|
Sorry for the wrong post, I was looking at your strut bar, and suddenly want to ask the question so I got in the wrong area...
But all those different shank length, how to measure which length is what I need? |
![]() |
![]() |
![]() |
#5 |
Reluctantly Crouched...
Drives: 2008 Yaris HB M/T Join Date: Oct 2008
Location: DFW, TX
Posts: 867
|
I'm not sure about your exact rims, but I do have a set of Kosei Racing RT Maxis that have a VERY thick hub, and require a lug nut with a shank to reach enough threads and still seat the angled portion properly. Maybe yours are like this?
![]() Splined tuner lugs are definitely worth the investment. |
![]() |
![]() |
![]() |
#6 |
![]() Drives: 08 Yaris Join Date: Jun 2009
Location: Los Angeles, CA
Posts: 14
|
This is the rims, I have no idea what lugs nuts to use, and do I need any wheel spacer?
![]() |
![]() |
![]() |
![]() |
#7 |
![]() ![]() Drives: 07 Mazda MX5 Copper Red Join Date: Jun 2009
Location: Melbourne, FL
Posts: 116
|
No idea on the spacer; you would need to test fit for clearance.
__________________
Brent Former Yaris Owner |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
LUG NUTS | elmo | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 8 | 05-01-2009 06:31 AM |
WTB : lug nuts and locks for 18" trd | AlphaFox | Willing to Buy by private party | 0 | 04-19-2009 08:04 PM |
lug nuts...? | at3GG | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 16 | 03-26-2009 10:16 PM |
Lug Nuts | jinxor | Cosmetic Modifications (Exterior/Interior) | 16 | 03-25-2009 08:00 PM |
Lug Nuts for Konig Helium Wheels? | OK Yaris | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 4 | 09-19-2006 05:58 PM |