1.8 ts,sr

[oxide666]

Originally Posted by CASTREX

You can use any carbon hood from a regular US spec Yaris. I have a US Seibon CF hood and it fits perfectly.

Same thing for lowering springs. You can use the H&R's or the Teins for the US Yaris. Both will fit.

CAI and underdrive pulley you can use from the scion xD

will the lowering springs work cuz the sr is alredy a bit lower than other yarisis will it make a drop in mine just lowering spring dont have enought for full coilover set yet?

[tcpty]

Originally Posted by oxide666

will the lowering springs work cuz the sr is alredy a bit lower than other yarisis will it make a drop in mine just lowering spring dont have enought for full coilover set yet?

I just installed Tanabe's on mine and they DID lower the car a bit more... about 3/4" front and 1" rear (from FACTORY TS springs which are a bit lower than stock Yaris)

[oxide666]

Originally Posted by tcpty

I just installed Tanabe's on mine and they DID lower the car a bit more... about 3/4" front and 1" rear

kl that about how much i wana drop anymore mite rub n where i live is full of speed bumps everywhere
which tanabe 1's they have a few n how much?

[CASTREX]

Originally Posted by oxide666

kl that about how much i wana drop anymore mite rub n where i live is full of speed bumps everywhere
which tanabe 1's they have a few n how much?

He used the Tanabe NF's from his previous Yaris.


Tanabe has 2 models for the Yaris NF's 9 about 1" drop and the DF's about 2" drop.

Been in Europe I would guess your best bet are the H&R's. Those are also about 1 inch drop. You can probably get them locally. Tanabes are around $200 in the US.

[tcpty]

Originally Posted by oxide666

kl that about how much i wana drop anymore mite rub n where i live is full of speed bumps everywhere
which tanabe 1's they have a few n how much?

Thanks Castrex!

If you want to read and see some pics of the stock vs NF's.. here's the link

http://www.yarisworld.com/forums/showthread.php?t=23662