Cruise control on 2007 4dr

[CTScott]

Originally Posted by Fazulka

It has an automatic transmission.

OK, so that means it's not the lack of the clutch cruise control switch.

Reading your initial post, it sounds like everything is correctly wired. The one thing you don't mention is where you grabbed the ground for the other leg of the switches. Make sure that you have a good solid ground.

Also. posting some pictures would help.

[Fazulka]

Originally Posted by CTScott

OK, so that means it's not the lack of the clutch cruise control switch.

Reading your initial post, it sounds like everything is correctly wired. The one thing you don't mention is where you grabbed the ground for the other leg of the switches. Make sure that you have a good solid ground.

Also. posting some pictures would help.

Ok, I'll take some pictures this afternoon. I have one ground from a self tapping screw that is under the cover your knees would bump if you pulled the drivers seat too far forward. I am using it as ground for 2 other things, the remote start / keyless entry module and power door locks. Is that an ok place? Where would be better?