DIY Cruise Control on 07-08 Yaris (step by step)

[CTScott]

Originally Posted by frankencar

So this may be a silly question but... this works on an AT liftback as well? Just ignore the parts that say "MT only?"

Also, I'm a bit confused on the part where you connect to the ECU. Is there a specific crimp/connector, some other method to plug into the ECU?

Correct on the AT - Works the same and ignore the clutch switch part.

For the ECM connection (on 06-08 Yaris), you need to actually add a pin to the smaller of the two connectors on the ECM. I highly recommend using the actual Toyota "repair terminal", which is the pin with its waterproof sleeve and a piece of wire pre-connected to it. (Part number: 82998-24250)