Exhaust tips

[eht13]

Thanks everyone. Those two I showed should be the same diameter; they are both noted as being for the Yaris specifically. As far as the screw on type, either these or the Wal-mart ones... they just have two screws, at a 90 degree angle to each other, that you screw in against the existing pipe to create enough tension that it is held securely? And they are secure enough that way? One I saw would have the tips of the actual screws touching the pipe, while the other had the screws pushing a flat head (a rectangular moving piece) against the pipe.

[DARK AGE 53]

Originally Posted by eht13

As far as the screw on type, either these or the Wal-mart ones... they just have two screws, at a 90 degree angle to each other, that you screw in against the existing pipe to create enough tension that it is held securely?

not mine.

[eht13]

Originally Posted by DARK AGE 53

not mine.

Thanks... that looks like a sturdier design. The ones I saw at Wal-mart had the other design I described, with two screws going in against the existing pipe, with either the screw tips or a rectangular head pushed by the screws holding against it. I guess your design is what they are referring to with the "single bolt-on" description.

Also, I noticed that the exhaust pipe on the sedan (maybe hatchback too) has the last portion of the pipe at a downward angle, not parallel with the ground or the car. So these tips are at that angle too, or do they somehow adjust for it? In the pictures I've seen they look more flush and parallel than that.

[DARK AGE 53]

Originally Posted by eht13

Also, I noticed that the exhaust pipe on the sedan (maybe hatchback too) has the last portion of the pipe at a downward angle, not parallel with the ground or the car. So these tips are at that angle too, or do they somehow adjust for it? In the pictures I've seen they look more flush and parallel than that.

my tip is what comes on the Onyx edtion, I'll remove it to see if the exhaust pipe has been cut.

[DARK AGE 53]

looks like stock end to me.

[eht13]

Originally Posted by DARK AGE 53

looks like stock end to me.

Thanks for checking and showing the pics. That is what the end of mine looks like too... hard to tell there if the slight downward angle is the same or not though.