Silencing Tanabe Medalion Touring?

[bobolinko]

Originally Posted by sternz

What kind of insulating materials have you guys used to eliminate the noise?

I used Rattle Trap and it came in a roll, and MUCH cheaper than the big-name-Dynamat, etc. I used 2 layers in most places. exp the floorboard area in the back by the spare.

[sternz]

Originally Posted by bobolinko

I used Rattle Trap and it came in a roll, and MUCH cheaper than the big-name-Dynamat, etc. I used 2 layers in most places. exp the floorboard area in the back by the spare.

Thanks for your recommendation bobolinko. While searching for Rattle Trap, I came across this product http://lobucrod.com and seems to be really good and not that expensive. Was this what you suggested? I'm bought, will def.. be getting this and quiet down my car even more all around. All you need to install is "1 can 3M spray glue, box cutter knife or scissors, tape, measure, easy."

Another product that seems real good by their sample video http://www.quietcoat.com/

[fmicle]

Originally Posted by bobolinko

I used Rattle Trap and it came in a roll, and MUCH cheaper than the big-name-Dynamat, etc. I used 2 layers in most places. exp the floorboard area in the back by the spare.

Does it make a big difference if you use 2 layers instead of one? Just curious about how much I should buy and if I should go 2 layers right from the start to avoid taking everything out twice...

Could you post some pictures? Did you use foam on the wheel wells? Inside or outside the car?