2006 Yaris Hatchback Replacing Stereo Head Unit help

[lauren24]

Originally Posted by CTScott

What you need is:

Trim wise:

Metra 95-8202 - Double Din kit for Toyota Yaris (basically two filler pieces for the sides)
or
The European true Double DIN replacement trim:
http://www.yarisworld.com/forums/sho...ighlight=180mm


Wiring wise:

Metra 70-1761 wiring harness (plugs into the Factory radio connector and then has wires which you match to the ones on the harness that came with your radio). There are also ones which are specific to radio manufacturers, which have a car specific end and a radio specific end, so you don't have to do the connections.


Bracket Wise:

You will reuse the ones that your factory radio are mounted with. You may have to grind or hammer down the alignment "bumps" on the bracket to allow your radio to be mounted at the proper depth (with the geometry of the factory radio, it sits out a bit further than most aftermarket ones want to).

exactly what i wanted to know, thanks for this!

Ive purchased this wiring harness, http://cgi.ebay.com.au/ws/eBayISAPI....m=400132268773 from ebay, i was confident this was going to work fine due to Yaris 99 and onwards description.

and just acquired the metra kit, http://cgi.ebay.com.au/ws/eBayISAPI....m=370186437538 here ..

hope these are the right parts, please let me know if i got it wrong.

thanks!