I NEED Boost... Opinions puh-lease - Toyota Yaris Forums

Nexus1155 · 08-20-2010, 12:30 AM

It was most likely freon, I hope you stepped away and didn't breathe any in. It is known to be harmful and cause cancer in some studies.

You are right, that Oil feed looks a little weird and there should be a better way, but that will work.

You look like you are making good progress, keep it going!.

If you are having fitment issues, I would just try to fit the turbo and manifold in at once without the downpipe on since you can get that in later, it may allow for easier rotationability that would help you out squeezing it in there?

You also may need to reclock the turbo, atleast the cold side since you manage where your lines are going. I can't see how that one reclocks but most likely if theres no bolts or collar theres a C Clip in there.

You can always take a couple of pliers and add force to bend the lines out the way a little bit, or just run no AC :P I dunno what the temps were in Jersey this year.

MORE PICS!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Autometer Cobalt 6170 Boost Gauge	Nexus1155	Items for Sale by private party	2	02-02-2011 04:08 PM
Multiple cylinder misfire under boost	LtNoogie	Forced Induction Forum	13	11-02-2009 04:44 AM
Fill up with Super before starting your boost project	LtNoogie	Forced Induction Forum	5	12-01-2008 06:41 PM
Supercharger Selection and Limiting Boost	Nexus1155	Forced Induction Forum	1	12-01-2008 03:51 PM
WTB: Boost Gauges	Teruyume	Items for Sale by private party	4	11-12-2006 02:42 PM

08-20-2010, 12:30 AM	#11
Nexus1155 Bathroom + Laptop = <3 Drives: Audi Join Date: Aug 2006 Location: Dorchester Posts: 1,009	It was most likely freon, I hope you stepped away and didn't breathe any in. It is known to be harmful and cause cancer in some studies. You are right, that Oil feed looks a little weird and there should be a better way, but that will work. You look like you are making good progress, keep it going!. If you are having fitment issues, I would just try to fit the turbo and manifold in at once without the downpipe on since you can get that in later, it may allow for easier rotationability that would help you out squeezing it in there? You also may need to reclock the turbo, atleast the cold side since you manage where your lines are going. I can't see how that one reclocks but most likely if theres no bolts or collar theres a C Clip in there. You can always take a couple of pliers and add force to bend the lines out the way a little bit, or just run no AC :P I dunno what the temps were in Jersey this year. MORE PICS!