Camcon VVTi Cam Timing Controller Thoughts?

[henry33]

and do we have some proofs on dyno etc ? ;)

[Jason@SportsCar]

Originally Posted by henry33

and do we have some proofs on dyno etc ? ;)

I have dyno sheets. But we will not share them at this time. Once we are done with the project all of the data will be out there. I will tell you we are making more power now NA than this car did when it had FI.

You don't have to believe. When we looked at the CamCon we thought it had ebay crap written all over it. But our tuner was able to make good gains with it, I would say better than any single bolt-on (except FI or NOS).

There is no upside for me to lie about it... The unit came with the car, and we have taken it out and moved on to an AEM EMS series 2. Is the CamCon anywhere near as good as stand alone? Not a chance, you have very limited control. But considering it is a fraction of the cost of stand alone, and it works as advertised, I would say it is a good value.

From what we have seen Toyota left a lot on the table in the ECU dept. We have unlocked more power with tuning on the Yaris than any other NA car we have done. Just getting it over 6500rpm is a big gain - unfortunately a gain the CamCon will not get you.