![]() |
|
|
|
|
|
#1 |
![]() ![]() ![]() Drives: 2009 3dr LB Manual Join Date: Mar 2010
Location: Dublin, Ohio
Posts: 412
|
Palmer, I went and tried the relay with no direct luck. I setup the relay with the blue/white on the coil, a 12V+ on the other coil terminal. Black/White (NSS) into the switch, chassis ground on the other. Nothing.
However, if I ground the black/white wire, the car THEN will provide a ground to the blue/white wire. Sort of backwards as to how I would set it up. This just means I'll keep the black/white grounded, then use the blue/white to trigger a relay, turning on the optical circuit, which would then bypass the clutch switch. Not the way I wanted to do it, but I guess it will have to work. Thanks again for your help. And CTScott, as usual, your idea worked like a charm! Thanks again! |
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Installing Trailer Light Harness | vandallen | DIY / Maintenance / Service | 7 | 06-10-2024 11:06 AM |
| yaris alarm | yaris2010RS | General Yaris / Vitz Discussion | 24 | 05-03-2011 07:31 PM |
| Keep your vehicle protected! | sqcomp | In Car Entertainment + Electronics (audio / video / alarm) | 17 | 09-10-2009 03:02 AM |
| Viper Alarm wiring help | Taiyaki | DIY / Maintenance / Service | 4 | 06-01-2009 06:05 PM |
| help me with my annoying alarm! | misteo | In Car Entertainment + Electronics (audio / video / alarm) | 1 | 10-21-2008 02:49 PM |