What size are 1ZZ-fe injectors?

[xbgod]

They're around 200cc, but hey I told you I would get you those injectors as soon as I get in. So don't go wasting your money. Those Precision Injectors I have are 380cc and cost around 450.00. You will not find a better injector than Precision. they are flow matched, meaning you will get exact amounts of fuel per cylinder.

Merry X-mass

XBG

[pimp my yaris]

Originally Posted by xbgod

They're around 200cc, but hey I told you I would get you those injectors as soon as I get in. So don't go wasting your money. Those Precision Injectors I have are 380cc and cost around 450.00. You will not find a better injector than Precision. they are flow matched, meaning you will get exact amounts of fuel per cylinder.

Merry X-mass

XBG

I already had these injectors. And I was under the impression that 1NZ injectors were 190-200cc. The problem is I am allready runing lean in the 5-6K range. So I wanted to install these until I recieve your larger injectors. Believe me I appriciate it very much.

1zz must be larger then 200cc though. I just want to program my FIC correctly.

[xbgod]

Understandable dude, didn't want you to spend undue money.

Rock-on

XBG

[xbgod]

And you don't have to run the full duty cycle of the 380cc injectors, thats what your fuel management is for.

I would hope with the AEM/FIC you could control a 380cc injector.

XBG

[pimp my yaris]

Originally Posted by xbgod

And you don't have to run the full duty cycle of the 380cc injectors, thats what your fuel management is for.

I would hope with the AEM/FIC you could control a 380cc injector.

XBG

Yes you can program up to 1000cc

[xbgod]

Pimp,.....I'll make a personal call to Greg Nakono over at AEM for you. I'm pretty sure you can control those 380cc injectors. Then you'll also have room to grow.

I'm 680cc yeah...I have full-standalone but controlling a injector shouldn't be an issue.

XBG

[xbgod]

Thats what I thought.

Never tell me something is too big...I'll make fit and work anyways

XBG