BIG driving lights.... how? - Toyota Yaris Forums

jonismyname · 09-29-2010, 09:34 PM

^ did you see that array scott? crashy would thank you...

i was browsing the catalogs at work again today and found hella's optilux 2500 driving lights w/angel eyes. i recently installed micro image's projector kit with the ccfl rings... and think these would complement them nicely!

i apreciate the link to mounting... the problem i have is stuff would have to be removed to pull the bumper cover, which i find myself doing more and more often. then everytime it's reassembled it has to be re-adjusted and just adding to the project time...

i'm considering reinforcing the bumper cover and mounting some lights to the ridge on the bottom of the grill, or hanging them from the upper ridge in the lower grill (have done before w/out reinforcement, would bounce on rough roads but fine on main roads)

we'll see though... without a shop and losing daylight this may get postponed... again...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question about lights	kaymm	General Yaris / Vitz Discussion	4	04-20-2020 09:10 PM
Electrical System Upgrade Advice	sqcomp	In Car Entertainment + Electronics (audio / video / alarm)	6	03-23-2016 01:15 AM
Tinting lights & windows pricing	wiirenet	Cosmetic Modifications (Exterior/Interior)	15	03-22-2009 12:09 AM
Bad Driving Techniques	Altitude	General Yaris / Vitz Discussion	10	02-10-2009 05:26 PM

09-29-2010, 09:34 PM	#21
jonismyname Drives: 08 liftback 5spd Join Date: Oct 2008 Location: adirondacks, ny Posts: 220	^ did you see that array scott? crashy would thank you... i was browsing the catalogs at work again today and found hella's optilux 2500 driving lights w/angel eyes. i recently installed micro image's projector kit with the ccfl rings... and think these would complement them nicely! i apreciate the link to mounting... the problem i have is stuff would have to be removed to pull the bumper cover, which i find myself doing more and more often. then everytime it's reassembled it has to be re-adjusted and just adding to the project time... i'm considering reinforcing the bumper cover and mounting some lights to the ridge on the bottom of the grill, or hanging them from the upper ridge in the lower grill (have done before w/out reinforcement, would bounce on rough roads but fine on main roads) we'll see though... without a shop and losing daylight this may get postponed... again...