looking to add power locks to 07 HB

[gabriel2012]

Thanks for the reply scott

I have a few questions though,
is this a hard install? any special requirements?

will this system interfere with the stock alarm that is activated when the manual locks are closed?(this alarm is a feature on puerto rico vehicles according to the manual)


also a bit off topic while I was searching I found info on a push to start module you were working on, can you lead me to a thread with the info on it?
does it work for people with manual locks like me?

thanks

[CTScott]

Originally Posted by gabriel2012

Thanks for the reply scott

I have a few questions though,
is this a hard install? any special requirements?

will this system interfere with the stock alarm that is activated when the manual locks are closed?(this alarm is a feature on puerto rico vehicles according to the manual)


also a bit off topic while I was searching I found info on a push to start module you were working on, can you lead me to a thread with the info on it?
does it work for people with manual locks like me?

thanks

It's not too bad to install. There is a thread on here somewhere with pictures of someone's install. The alarm won't be an issue since the actuators act like you are opening the door with the key.


For the Push to Start, I don't recall if I have any threads on here about it, but there are a couple on MicroImage. It is just for starting/stopping the engine, so it doesn't matter if you have manual locks.

Development of my Push to Start module:
http://www.microimageonline.com/foru...ke-It-Work!...

Push to Start OEM Trim Pieces for Liftbacks:
http://www.microimageonline.com/foru...=push+to+start