Head Unit Eye Candy: Post Pics of your HU here - Page 6 - Toyota Yaris Forums

_S7V7N_ · 01-22-2011, 11:11 PM

http://www.yarisworld.com/forums/showthread.php?t=28635 Gotta love the search function and google = )

I got bored so i searched the Install guide as well...http://www.installer.com/pdf/95-8202.pdf

Nodrog · 01-29-2011, 08:16 PM

Here are pics of my new HU, a Boss 7" DVD unit. Thanks to Kongquistador for the faceplate (bought from him off eBay), and thanks to S7v7n for the help with the wiring harness! This forum is awesome!

Now I have to figure out why the disc drive only pulls discs in 3/4 way and stops...

Nodrog · 01-29-2011, 08:20 PM

Quote:

Originally Posted by N9QGS

I certainly someone can clear something up for me.... I have a 2007 US Yaris S that came with the "integrated radio" the radio that is mounted into the trim panel with the vent cut outs.

But you guys have pictures of what appears to be my model based on the dashboard) and you have double din.. So can someone explain how this radio stays in place? Cause I really would like to get something like a Kenwood DNX6160.

BTW, N9QGS, I used the mounts right off the factory radio, did not need any kit besides the faceplate. The faceplate that Kong sells on eBay is a smaller hole than others, so you don't need any 'spacers' or any other special mounting hardware.

sqcomp · 01-29-2011, 08:44 PM

@ N9QGS - I absolutely know that the shop is 100% wrong. How? I converted from an integrated radio in my 2007 Yaris S to a single DIN using a kit and a new Toyota piece that you'll see on the YW link that S7V7N put up. The cost was around $100 I'd say for the kit and the new trim piece from Toyota. I also have pics on how I got from that to this:

Notice the the source unit area, not the kick. It's the same kit Derick is using, except I took it two steps more. I bonded the kit pocket closed with "melted" plastic (no heat was used), and then I had it painted to match the OEM car color.

_S7V7N_ · 01-29-2011, 11:11 PM

I know back a few years ago cd players used to have a screw on top of the unit when they were brand new that you had to remove in order for the unit to work, usually had a big sticker that said to remove it, may want to check for that. And no problem, there's a few of us here who are more than happy to help.

Nodrog · 01-30-2011, 12:56 AM

Quote:

Originally Posted by _S7V7N_

I know back a few years ago cd players used to have a screw on top of the unit when they were brand new that you had to remove in order for the unit to work, usually had a big sticker that said to remove it, may want to check for that. And no problem, there's a few of us here who are more than happy to help.

OMG, lol! You were so right!
Funny thing, I saw this on the unit before I hooked it up, and I literally thought it meant "remove these screws if you do any repairs", because of the word "fixing"...

Everything works now!

_S7V7N_ · 01-30-2011, 01:03 AM

No prob man, glad it was a simple fix.

nOmi_89 · 02-07-2011, 10:12 AM

using stock head unit :P

can i use amp with it ??

i dunno where to plug the amp leads can anyone guide me plz :)

nOmi_89 · 02-07-2011, 12:03 PM

thanks *Seven* for helping :)

i'll upload the next step pic soon so i cud just confirm that im not doing anything wrong :)

_S7V7N_ · 02-07-2011, 12:12 PM

I posted on your other thread, imma delete this so it won't be double posting, just post any other questions on your Install thread..Thanks = )

nOmi_89 · 02-08-2011, 04:23 AM

okay :)

Yaris_That · 02-22-2011, 09:09 PM

Clarion Cz500. I find it sick!

sqcomp · 02-22-2011, 09:49 PM

That dash kit looks familiar! Good stuff! It's the same dash kit I'm using.

IsLNdbOi · 02-22-2011, 10:22 PM

Looks just like the Scosche dash kit.

Yaris_That · 02-23-2011, 01:12 PM

Quote:

Originally Posted by IsLNdbOi

Looks just like the .

lol ya it's the Scosche dash kit.

gas · 02-25-2011, 03:36 AM

That's my Pioneer 3200 BT !!

Robbie · 02-25-2011, 04:43 AM

Quick question I have about all these head unit radio systems..
Do any of them support the new digital radio format.

I was surprised to learn that my 2010 Yaris factory stereo is still only analog when all of our stations had made the switch to digital over 2 years ago now.

So if I was to replace my factory stereo unit with one of these fancy head units with the gps and dvd etc.. do they have digital?

Yaris_That · 02-26-2011, 06:05 PM

Quote:

Originally Posted by gas

That's my Pioneer 3200 BT !!

Vary nice !

01-29-2011, 08:44 PM	#94
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	@ N9QGS - I absolutely know that the shop is 100% wrong. How? I converted from an integrated radio in my 2007 Yaris S to a single DIN using a kit and a new Toyota piece that you'll see on the YW link that S7V7N put up. The cost was around $100 I'd say for the kit and the new trim piece from Toyota. I also have pics on how I got from that to this: Notice the the source unit area, not the kick. It's the same kit Derick is using, except I took it two steps more. I bonded the kit pocket closed with "melted" plastic (no heat was used), and then I had it painted to match the OEM car color. __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

01-29-2011, 11:11 PM	#95
_S7V7N_ Drives: Yaris 4 Door Sedan Join Date: Dec 2008 Location: South Texas Posts: 805	I know back a few years ago cd players used to have a screw on top of the unit when they were brand new that you had to remove in order for the unit to work, usually had a big sticker that said to remove it, may want to check for that. And no problem, there's a few of us here who are more than happy to help. __________________ Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3

01-30-2011, 01:03 AM	#97
_S7V7N_ Drives: Yaris 4 Door Sedan Join Date: Dec 2008 Location: South Texas Posts: 805	No prob man, glad it was a simple fix. __________________ Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3

02-07-2011, 12:12 PM	#100
_S7V7N_ Drives: Yaris 4 Door Sedan Join Date: Dec 2008 Location: South Texas Posts: 805	I posted on your other thread, imma delete this so it won't be double posting, just post any other questions on your Install thread..Thanks = ) __________________ Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3

02-22-2011, 09:49 PM	#103
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	That dash kit looks familiar! Good stuff! It's the same dash kit I'm using. __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

02-07-2011, 12:03 PM	#99
nOmi_89 View User's Garage Drives: 2007 Toyota Yaris Join Date: Jan 2011 Location: Pakistan Posts: 34	thanks Seven for helping :) i'll upload the next step pic soon so i cud just confirm that im not doing anything wrong :)

02-08-2011, 04:23 AM	#101
nOmi_89 View User's Garage Drives: 2007 Toyota Yaris Join Date: Jan 2011 Location: Pakistan Posts: 34	okay :)

02-22-2011, 10:22 PM	#104
IsLNdbOi Drives: Polar White - 5 Door '09 LB Join Date: Aug 2006 Location: Las Vegas, NV Posts: 1,285	Looks just like the Scosche dash kit.

02-25-2011, 03:36 AM	#106
gas Mr View User's Garage Drives: Yaris 1,33 Join Date: Sep 2010 Location: Greece , Komotini Posts: 27	That's my Pioneer 3200 BT !!

02-25-2011, 04:43 AM	#107
Robbie View User's Garage Drives: 2010 Toyota Yaris YR, 5 door H Join Date: Feb 2011 Location: Queensland, Australia Posts: 17	Quick question I have about all these head unit radio systems.. Do any of them support the new digital radio format. I was surprised to learn that my 2010 Yaris factory stereo is still only analog when all of our stations had made the switch to digital over 2 years ago now. So if I was to replace my factory stereo unit with one of these fancy head units with the gps and dvd etc.. do they have digital?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post pics of cylinder head (engine) covers here	joelitton	Cosmetic Modifications (Exterior/Interior)	157	08-02-2017 11:36 AM
ANAL THREAD VER 2.0	dvlnblkdrs	Off-topic / Other Cars / Everything else Discussions	238	08-19-2010 09:21 AM
srs / airbag light after head unit install?	KwonSau	In Car Entertainment + Electronics (audio / video / alarm)	7	12-24-2008 02:04 AM
Req: Head unit suggestions.	xed	In Car Entertainment + Electronics (audio / video / alarm)	21	08-09-2007 07:38 PM
High pitched whine using stock head unit / aux input?	IsLNdbOi	In Car Entertainment + Electronics (audio / video / alarm)	8	02-02-2007 12:49 PM