Remote Start DIY Wiring Guide 2006-2010 Yaris

[CTScott]

Originally Posted by bad_bwoy007

Still nothing, not able to enter into reservation mode.

I'm really stumped, I tried both park brake wire grounded and the with the transition to ground.

I don't know what else could be causing the system not to advance into reservation mode.

I would check the voltages on the connectors for the remote starter to make sure your taps are goof for the e-brake, brake, tach (because it is a pulsed signal it will read as a voltage somewhere between 0 and 12 with the engine running {but should not read 0 or 12}). One of those not being good seems to be the most likely reason why it's not going in.