Right Headlight not working, not bulb/fuse - Toyota Yaris Forums

746watts · 05-10-2011, 02:27 PM

Thanks CTScott,
It doesn't have daytime running lights. The bulb sockets have the factory conductive grease on them and I am getting a very good non-rusty contact.
.........I just went out to check connections again. I have it sorted.
I took the bulb out and connected the 3-pin to the bulb outside of the headlight and it worked perfectly well. So back in with the bulb minus the rubber boot and it worked.
So next off with the 3 pin and put the rubber boot back on and I found out why it wasn't working........... I didn't line up the 3-pin correctly because of the tight fit and only had the top connector on the bulb. So with a more correct approach I have the 3-pin connected properly. I feel like such a muppet to make an ass of an easy connection.
Thanks for your help CTScott, it made me look more closely at it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Projector/HID (sedan)	Brian	DIY / Maintenance / Service	145	02-05-2012 04:13 AM
Silverstar Ultra 9003/HB2 vs OEM headlight bulb comparison	CTScott	DIY / Maintenance / Service	54	02-14-2011 08:58 AM
How To Smoked Sedan Headlight -DIY	zulhizainL902S	DIY / Maintenance / Service	26	01-14-2011 02:12 AM
Glassylite Headlight Restoration Kit	TEHxFALLEN V1.2	Photo-Video-Media Gallery	1	07-03-2010 12:51 AM
HELP! I detailed my interior, and now having a headlight issue!	Astroman	DIY / Maintenance / Service	4	06-08-2010 06:51 PM

05-10-2011, 02:27 PM	#3
746watts Drives: 2014 yaris hybrid Join Date: Nov 2010 Location: Midlands, Ireland Posts: 31	Thanks CTScott, It doesn't have daytime running lights. The bulb sockets have the factory conductive grease on them and I am getting a very good non-rusty contact. .........I just went out to check connections again. I have it sorted. I took the bulb out and connected the 3-pin to the bulb outside of the headlight and it worked perfectly well. So back in with the bulb minus the rubber boot and it worked. So next off with the 3 pin and put the rubber boot back on and I found out why it wasn't working........... I didn't line up the 3-pin correctly because of the tight fit and only had the top connector on the bulb. So with a more correct approach I have the 3-pin connected properly. I feel like such a muppet to make an ass of an easy connection. Thanks for your help CTScott, it made me look more closely at it.