![]() |
|
|
|
#4 |
![]() ![]() ![]() ![]() ![]() Drives: '08 LB MT Bayou Join Date: Oct 2008
Location: Colorado
Posts: 1,671
|
I mounted my UltraGauge on the drivers side glove box using strong magnets. Crazy glued one magnet to the gauge bracket and stacked two magnets inside the cover of the dash box. Of course the UltraGauage is probably a lot lighter than your temperature gauge but it might be worth a shot if you intend to mount it in a similar spot.
Also, I've used the 3M mounting tape and like another poster said - clean the area - lay down the tape - press real hard for a few seconds then leave it alone undisturbed for a while to let the bond set. It should hold after that. |
|
|
|
|
|