little black arm/hinge on door??

[bobolinko]

Originally Posted by jeff69dini

thanks!!! hmm, any idea why one might suddenly jam while the door was partially open? I sorta put more force on it and it opened all the way

Before you spend any $ on it, try this:

Open the door all the way open. Might have to again use little pressure to open it all the way. Put some light oil (wd40) or the like on the bar portion of the stop check mech. Be sure to do the upper AND lower part of it. Close the door and open all the way repeatedly and most likely the movement will become easier. It sometimes gets "tight" when the mechanism does not travel over a spot often enough. (partially opening the dor all the time, vs opening the door all the way). I'll bet you "fix" the problem without lifitng a tool!

Good Luck!