Yaris Sedan Deadening and Sound system upgrade

[sqcomp]

Yes to both. :)

It amazes me sometimes how far we come and yet how circular things are. I'm hearing that the tweeters aimed slightly into the glass are just a big winner for me. The issue I was having on the all pillar setup was left side width. With the mid below in the kick I have more width on that left side.

I'll have I e-mail you the camera shots of the placement where it sounded the best for me.

[derickveliz2]

Originally Posted by sqcomp

Yes to both. :)

It amazes me sometimes how far we come and yet how circular things are. I'm hearing that the tweeters aimed slightly into the glass are just a big winner for me. The issue I was having on the all pillar setup was left side width. With the mid below in the kick I have more width on that left side.

I'll have I e-mail you the camera shots of the placement where it sounded the best for me.

Yes! I'v been there! with tweeters it's hard with all the reflection either avoid them or play with them, my tweeters are kind of aiming towards the windshield.

For the Mid down on the left, I agree. Gives me more width that the a-pillar install and that's why I did the extra mile cutting the metal to push it as much as possible physically it's my speaker that sits farther to the left, both mids are off-axis but the left one has a slightly angle so if you see them from the pilots position they look almost to the same angle towards the listener.

My theory is that this way both drivers would give me the same off-axis response. I may be far away from a pro-install, but man sounds good!


BTW... I missed Why? for a "show off" we re-schedule for next week. That gives me time to start tuning each side individually like I stated a few posts above. Wish me luck. Will be waiting for that email, I'm curious to see how you end up aiming your mids and tweets now.

D.