lack of audible tone for keyless entry

[veewonwon]

Originally Posted by CTScott

I just need to get my hands on a 2012 to sniff the CAN bus messages to see if body ECU ones are the same as for the prior generation.

While you're checking the code out, I wonder if you can see if the flashing can be turned off during locking and unlocking activities. I would prefer not to have any signs at all.

Many thanks.

[CTScott]

Originally Posted by veewonwon

While you're checking the code out, I wonder if you can see if the flashing can be turned off during locking and unlocking activities. I would prefer not to have any signs at all.

Many thanks.

For the 2012's here are the "customize parameters" via TechStream:

Wireless Control - Function that turns wireless door lock / OFF or ON

Hazard Answer Back - When the doors are locked by wireless operation, the hazard warning lights flash once.
When the doors are unlocked by wireless operation, the hazard warning lights flash twice.

Unlock 2 Operation - Function that unlocks driver door when unlock switch on door control transmitter module set sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.

Panic Function - Function to operate theft deterrent system by continuously pressing panic switch on door control transmitter module set sub-assembly for 0.8 seconds

Auto Lock Time - (30, 60, or 120 s) Function that regulates the interval between unlocking and automatic relocking of doors

Wireless Auto Lock - This function turns the wireless auto lock function on or off.

[Shroomster]

Originally Posted by veewonwon

While you're checking the code out, I wonder if you can see if the flashing can be turned off during locking and unlocking activities. I would prefer not to have any signs at all.

Many thanks.

Referencing ctscotts post, in techstream customize menu, you would want the hazard answer back turned off.....

[veewonwon]

Originally Posted by Shroomster

Referencing ctscotts post, in techstream customize menu, you would want the hazard answer back turned off.....

Thanks for the keyword "hazard answer back", I was able to search the relevant thread.

So I guess I've to visit my dealer to perform this change, and there is no DIY method available for the MY2012.