I NEED Boost... Opinions puh-lease - Toyota Yaris Forums

Focus_Sh1ft · 12-19-2012, 07:17 PM

I wish I could Scott, but with how the car is running it's not feasible. Thanks for the offer tough.

I was thinking though... If I shipped you one of these ECMs I have, could you possibly confirm if it's in a working state? Obviously doing the check through my car and thus the harness would be best but... Yeah. Still, if I could find out if the ECM is good or bad, that's still a pretty good datapoint.

One other thing regarding checking the harness... In the service manual's ECM pinout, would I be right in thinking the two pins listed under 'Symbols (Terminal No.)' should always have continuity?

CTScott · 12-19-2012, 07:20 PM

Quote:

Originally Posted by Focus_Sh1ft

I wish I could Scott, but with how the car is running it's not feasible. Thanks for the offer tough.

I was thinking though... If I shipped you one of these ECMs I have, could you possibly confirm if it's in a working state? Obviously doing the check through my car and thus the harness would be best but... Yeah. Still, if I could find out if the ECM is good or bad, that's still a pretty good datapoint.

One other thing regarding checking the harness... In the service manual's ECM pinout, would I be right in thinking the two pins listed under 'Symbols (Terminal No.)' should always have continuity?

I can definitely check out the ECM for you. I can also give you a list of specific harness points to check (the ones most likely related to the behavior).

Focus_Sh1ft · 12-19-2012, 07:25 PM

Quote:

Originally Posted by CTScott

I can definitely check out the ECM for you. I can also give you a list of specific harness points to check (the ones most likely related to the behavior).

I would definitely appreciate the harness points list. I'll get back to you on the ECM though. I need to see how the dealership responds to my request first. Considering we've bought three cars from them, I hope reasonably...

CTScott · 12-21-2012, 11:43 PM

Quote:

Originally Posted by Focus_Sh1ft

I would definitely appreciate the harness points list. I'll get back to you on the ECM though. I need to see how the dealership responds to my request first. Considering we've bought three cars from them, I hope reasonably...

Here it is:

Yaris ECM - Connections.pdf

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Autometer Cobalt 6170 Boost Gauge	Nexus1155	Items for Sale by private party	2	02-02-2011 05:08 PM
Multiple cylinder misfire under boost	LtNoogie	Forced Induction Forum	13	11-02-2009 05:44 AM
Fill up with Super before starting your boost project	LtNoogie	Forced Induction Forum	5	12-01-2008 07:41 PM
Supercharger Selection and Limiting Boost	Nexus1155	Forced Induction Forum	1	12-01-2008 04:51 PM
WTB: Boost Gauges	Teruyume	Items for Sale by private party	4	11-12-2006 03:42 PM

12-19-2012, 07:17 PM	#1
Focus_Sh1ft Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010 Location: New Jersey Posts: 875	I wish I could Scott, but with how the car is running it's not feasible. Thanks for the offer tough. I was thinking though... If I shipped you one of these ECMs I have, could you possibly confirm if it's in a working state? Obviously doing the check through my car and thus the harness would be best but... Yeah. Still, if I could find out if the ECM is good or bad, that's still a pretty good datapoint. One other thing regarding checking the harness... In the service manual's ECM pinout, would I be right in thinking the two pins listed under 'Symbols (Terminal No.)' should always have continuity?