Aftermarket Part out

[OTB]

Hey suckerface, don't forget the free mods for the mini:

1. more front negative camber. Really easy, loosen top strut mount to the tower, pull out that pin that locates the extra hole, push the strut all the way inboard, tighten.

2. get rid of that stupid noisemaker pipe that takes boost air and blows it to the cabin (not free, but a couple dollars for a pipe cap and a hose clamp.

(the brz/frs have a similar noisemaker for intake air-how f_ing stupid is that?)

[suckerface]

Originally Posted by OTB

Hey suckerface, don't forget the free mods for the mini:

1. more front negative camber. Really easy, loosen top strut mount to the tower, pull out that pin that locates the extra hole, push the strut all the way inboard, tighten.

2. get rid of that stupid noisemaker pipe that takes boost air and blows it to the cabin (not free, but a couple dollars for a pipe cap and a hose clamp.

(the brz/frs have a similar noisemaker for intake air-how f_ing stupid is that?)

Thanks OTB! I'm going to wait on the camber things until this summer. I have a set of 18s I was going to put on the Yaris that are going to go on the MINI now, so I'll play then.

Noisemaker pipe, as well as boost tube muffler, are towards the top of the list. Going to stop in to a shop of a guy I know to see how much he can get me the parts for, and they'll be out ASAP.