 |
 |
|
|
03-18-2013, 03:26 PM
|
#8 |
  |
just a followup, if you ever change a hard line and use new screws on each end, you will have to keep going back and checking each day for seepage because until those screws seat well, you will have seepage. The original screws on all the other lines tightened up and never seeped a drop.
I just keep going back with a wrench on the new screws and tightening another 1/8 to 1/4 turn...you absolutely do not want to over-tighten. |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| The Basics on Brake Upgrades | kngrsll | Performance Modifications | 56 | 03-06-2024 09:50 AM |
| DIY (sorta) - RunStop Rear disc brake conversion | eTiMaGo | DIY / Maintenance / Service | 17 | 07-02-2019 09:24 AM |
| DIY Rear Drum Brake Adjustment/Parking Brake W/ PICS Inside | YarisSedan | DIY / Maintenance / Service | 73 | 03-11-2017 07:05 PM |
| red hot brake shoes | tommo | DIY / Maintenance / Service | 1 | 08-31-2011 08:34 PM |
| How much for a rear brake job | bankrobber | DIY / Maintenance / Service | 3 | 04-19-2010 01:34 PM |
Threaded Mode