B1900 srs code

[yakovenkooleg]

ok...narrowed it down a little bit. when i put a resistors in both connections it did the trick, the light went off without even clearing the code!! (good news) than i began doing them separately! hooked up a seat-belt right (passenger side) but left the resistor in the left side (drivers side) seat-belt connector, again, the light goes off! hooking up the left side (drivers) connector to a seat-belt, light remains on! what could that possibly be? seat-belt should be good because when i test that seat belt on the right (passenger) side it works, but doesn't work on the left (drivers side)

[CTScott]

Originally Posted by yakovenkooleg

ok...narrowed it down a little bit. when i put a resistors in both connections it did the trick, the light went off without even clearing the code!! (good news) than i began doing them separately! hooked up a seat-belt right (passenger side) but left the resistor in the left side (drivers side) seat-belt connector, again, the light goes off! hooking up the left side (drivers) connector to a seat-belt, light remains on! what could that possibly be? seat-belt should be good because when i test that seat belt on the right (passenger) side it works, but doesn't work on the left (drivers side)

That is very strange that it works on one side but not the other. It may be that the harness connector is damaged to where the resistor can make contact with the pretensioner pins, but the pt pins can not.