Wipers Not Working Properly

[toy_toronto]

Originally Posted by sex

Did you try testing the wiper switch per WW-39 in the service manual? Could be the contacts inside the switch are bugging out

With all the snow/ice we're getting here in Toronto, I haven't really had a chance to look to be honest. My garage garage is currently packed with junk right now since we just moved recently

Originally Posted by CTScott

The wiper relay is part of the stalk. There is a feedback mechanism from the wiper motor on the white wire, which is a signal fed off a cam for parking. With the both parking and low speed not working, I would suspect the stalk to be the culprit.

I considered the relay but thought I should have no wiper operation at all if it were the cause --guess i could start hunting down a used stalk which would probably cost alot less than the local dealer's estimate charge +parts

Thanks for all your suggestions, will keep you all posted once I find a resolution!


Edit: Wondering if any of those folks who upgraded their wiper stalk with intermittent function have a spare they're willing to sell? -cheers.

-toy
.