Oil Change [Done]

[bronsin]

Originally Posted by vaironl

I was just checking out their deals earlier. Read a couple of people say they have some good products and some bad products, well every store does. Since you pointed them out I'll swing by the store today. They also have free coupons for some items .

http://www.harborfreight.com/1-4-qua...ench-2696.html

http://www.harborfreight.com/1-2-hal...rench-239.html

I'm assuming I should get the 1/2 for more leverage 18in vs 11in?

Harbour Freight the BEST STORE IN THE WORLD if you are a man!

I am happy with ALL my HF purchases. Although I note prices are going UP!

I think you are right the 1/2 inch driver is the way to go.

However...

I feel obligated to point out its not really necessary to use a torque wrench on your wheels. I use the one that comes with the car with a cheater 1 1/2 inch PVC white plastic water pipe about 18 inches long. I guess I torque them to about 25 ft lbs I am crippled and if in an emergency had to r and r a wheel wouldnt be able to do ones t'd to 80 ft lbs.

Maybe mag wheels need TR's?