My 2011 Vitz

[MiSFiTx87]

Originally Posted by TerenceCruz

All you basically have to do is take off the plastic cover on your trunk by pulling carefully on the side, it'll just snap off one by one until you get to the other side. Then unplug the motor, it's a white plug you just squeeze on the side then pull off. Then I believe there are four 10mm nuts you have to remove then the motor will just come off. I got the 0 ring from the dollar store lol. It was a box full of different sizes.

thanks again Terence, was a struggle removing the plastic cover lol but i finally got it off, need to find a o-ring or get some silicon to seal around it

[TerenceCruz]

Originally Posted by MiSFiTx87

thanks again Terence, was a struggle removing the plastic cover lol but i finally got it off, need to find a o-ring or get some silicon to seal around it

No problem man. And yeah, luckily I had already removed that cover once in order to do that standing wiper mod. But, the wiper delete was definitely a good choice Silicon would be a good idea too, I might do the same.