Stock (factory) yaris Timing ?

[salmanghiyas]

in fact ... i've already started the project ... wish me luck

1: custom made exhaust headers ...
2: custom made 2.25" down piping ...
3: TOPSPEED exhaust muffler 2.5" inlet and 4" outlet ...
4: custom made resonator in the mid ... exact copy of the OEM resonator ...
5: Lightened Flywheel ... before it was 5.8KG and now its 4.8KG ...
6: 1zz TB
7: 1zz aluminum IM .. just the same as Tooter's ...
8: custom made SRI tube 3" diameter
9: and last but not the least K&N big cone ... 10" long


some pics are attached ... more to come ...

I would again say .. that my inspiration is Tooter ... thanks to him as well .. as when ever i asked help from him, he was there ...

[WeeYari]

Originally Posted by salmanghiyas

8: custom made SRI tube 3" diameter

Tell us more about what you are doing here. You must ensure that the intake tube reduces to OE diameter at the MAF, or you will throw codes. The ECU cannot compensate for that much increased airflow.

[salmanghiyas]

Originally Posted by WeeYari

Tell us more about what you are doing here. You must ensure that the intake tube reduces to OE diameter at the MAF, or you will throw codes. The ECU cannot compensate for that much increased airflow.

ahaan ... thank god my fabricator hasn't started working on it

so i'll take deep measurements of the OEM intake tube and then will ask him to make the same SRI with exact same dimensions and dia ....