 |
 |
|
|
12-15-2015, 11:44 PM
|
#1 |
  Drives: 2007 yaris 3 door Join Date: Sep 2015
Location: Denver, Colorado
Posts: 1,000
|
Port&Paint Intake Manifold
hello. I have done some extensive porting on the intake manifold. I cut out the o ring valley and added JB weld as a filler in holes. I also filled o ring gap and added JB weld to the OUTSIDE where there is a sharp corner on the inside. then I went through like 100 sheets of sandpaper.
then I taped it up. primmer [IMG]http://www.yarisworld.com/forums/picture.php? albumid=1179&pictureid=6104[/IMG] then a few coats of paint, some tape, and some more paint. then just a little clear coat... it turned out pretty ok... |
|
|
|
12-16-2015, 04:46 AM
|
#2 |
|
Drives: 2013 Yaris Hatchback L Join Date: May 2013
Location: Newark NJ
Posts: 229
|
Nicely done! I assume you have a 1zz throttle body to take advantage of your work or are planning on getting one? Even with the stock TB i bet she growls something fierce now!
|
|
|
|
|
12-16-2015, 05:22 AM
|
#3 |
Drives: Decepticon - Ravage Join Date: Nov 2008
Location: San Francisco
Posts: 1,464
|
ooh glossy. Love it. Hope it can stay that way in the bay
__________________
 Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274 |
|
|
|
|
12-16-2015, 07:33 AM
|
#4 |
Drives: '08 2zr swapped Vios M/T Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
|
Nicely done!
__________________
No one ever wants to give a Yaris the point by... 
|
|
|
|
|
12-16-2015, 05:00 PM
|
#5 |
Drives: Yaris '05 1.3 Hatch "R.I.P." Join Date: Aug 2014
Location: South Africa
Posts: 127
|
Looking good man! I've always wanted to do this but time is of the essence :(
|
|
|
|
|
12-17-2015, 10:42 PM
|
#6 | |
|
Drives: 2007 yaris 3 door Join Date: Sep 2015
Location: Denver, Colorado
Posts: 1,000
|
Quote:
I spent about 2 weeks slowly sanding and feeling... it was a labor of love... |
|
|
|
|
|
12-17-2015, 10:43 PM
|
#7 | |
|
Drives: 2007 yaris 3 door Join Date: Sep 2015
Location: Denver, Colorado
Posts: 1,000
|
Quote:
|
|
|
|
|
|
12-17-2015, 10:48 PM
|
#8 | |
|
Drives: 2007 yaris 3 door Join Date: Sep 2015
Location: Denver, Colorado
Posts: 1,000
|
Quote:
2000 grit! I plan to do the "chip swap" but i'm not sure what's going on in there. the posts make it seem extra easy. I also just learned about the JDM RS maf sensor and RS vvt-i spool, AND RS coil packs so i'm trying to source them suckers! |
|
|
|
|
|
12-17-2015, 11:27 PM
|
#9 |
|
Drives: '08 2zr swapped Vios M/T Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
|
Did you seriously manually sand the manifold?! Dude, I dremmel'd it and it still took 4 hrs to completely finish. I feel back for your hands...
__________________
No one ever wants to give a Yaris the point by...
|
|
|
|
|
12-18-2015, 11:53 PM
|
#10 |
|
Drives: 2007 yaris 3 door Join Date: Sep 2015
Location: Denver, Colorado
Posts: 1,000
|
well no. I did do a rough cut to get it close, but maybe like.....3 or 4 hours by hand. I still want to sand it more. I had to put it in a bag and put it away out of sight so I would stop messing with it and do something else...
|
|
|
|
|
12-19-2015, 12:10 AM
|
#11 |
|
Mr. 155 and climbing
Drives: Seriously Modded 07 Sedan Join Date: Jun 2006
Location: In The Hotbox
Posts: 4,742
|
I am pretty sure I still have my stock intake mani. Looks like a lot of work you have done. I would have given you mine just to not throw it away.
Sent from my XT1575 using Tapatalk
__________________
Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes. |
|
|
|
|
12-19-2015, 12:21 PM
|
#12 |
|
Drives: '08 2zr swapped Vios M/T Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
|
For anyone interested in this mod but doesn't want to do it themselves, keep an eye out for the classifieds next week. I may or may not have gotten a MI intake mani and i'll be selling my self ported manifold.
It does make a big difference in throttle response and high end power, especially if you have the 1zz tb
__________________
No one ever wants to give a Yaris the point by...
|
|
|
|
|
12-19-2015, 08:04 PM
|
#13 |
|
Drives: 2007 yaris 3 door Join Date: Sep 2015
Location: Denver, Colorado
Posts: 1,000
|
how much did you pay? (MI intake) I only see them for like $750-$850 and there is no way I could justify paying that much for it...
|
|
|
|
|
12-20-2015, 01:00 AM
|
#14 |
|
Drives: '08 2zr swapped Vios M/T Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
|
Stay tuned next week and i'll be posting my review of it wiith all my other mods and i'll mention how I got one under my budget (hint: another YW member knew a person selling one in a price range that fit my budget)
__________________
No one ever wants to give a Yaris the point by...
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| JB Weld stock intake manifold port w/ 1ZZ Throttle Body | tmontague | Performance Modifications | 2 | 10-07-2015 10:31 PM |
| 1zz intake manifold | crazylegs | Performance Modifications | 7 | 08-02-2015 09:02 PM |
| FS feeler thread: M/I intake manifold, TB and intake! | mr_miles | Items for Sale by private party | 10 | 06-14-2014 10:37 PM |
| Intake Systems Decision Maker.. | Blenjar | Performance Modifications | 25 | 09-15-2007 11:07 PM |
Linear Mode
