 |
 |
|
|
01-01-2016, 10:27 PM
|
#6 |
|
1NZ-6spd
Drives: '05 6-Spd Vitz RS Join Date: Oct 2008
Location: Oshawa, Ontario, Canada
Posts: 2,967
|
Chances are the wiring was still ok even if it was chewed or there would definitely have been a code. Then engine NEEDS the MAF to run effectively. If the TB was nasty that would most likely have been the issue.
Do you have a picture of the wiring? |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Erratic/High Idle | twitchyboy | DIY / Maintenance / Service | 11 | 11-22-2015 12:14 PM |
| Rough idle after disconnecting battery | Sollexe | DIY / Maintenance / Service | 3 | 10-29-2015 10:49 AM |
| Vibration on idle & rough start | Murtaza_murti | DIY / Maintenance / Service | 25 | 08-15-2015 12:58 PM |
| Bad Idle | mamun22s | DIY / Maintenance / Service | 4 | 11-23-2013 08:24 PM |
| 2008 Yaris bad idle and stalling | kou | DIY / Maintenance / Service | 8 | 04-22-2013 10:53 AM |
Threaded Mode