Automatic headlight kit installation

[Sarvesh]

Originally Posted by CTScott

The light blue large wire is the low beam headlight (ground that wire to turn them on).

The pink large wire is the high beam headlight (ground that wire to turn them on).

The green wire is the parking light wire (supply +12V to turn them on)

The white wire is an always on +12V that supplies power to the green wire via the headlight switch.

For an ignition switched power wire you have to look at the ignition switch connector - The pink wire on it is +12V switched power.

The white/black stripe wires are grounds

CTScott...I wired the system accordingly, however when I switch full beam it doesn't work. Likewise the system says it should switch off for 5 seconds when the car is started to avoid battery drain but it's actually starting the car with the headlight on when I turn the key. Could you please help.