My 2011 Vitz

[tadakun]

Originally Posted by TerenceCruz

Hahaha although I'm not opposed to bags at all, strictly static for this car

haha fair enough.

hey I know these cars have the back wheels that are offset slightly from side to side. Do you know what the difference is from side to side? like if i wanted to get the poke equal on both side?

[TerenceCruz]

Originally Posted by tadakun

haha fair enough.

hey I know these cars have the back wheels that are offset slightly from side to side. Do you know what the difference is from side to side? like if i wanted to get the poke equal on both side?

That's right, due to the crooked torsion beam in the rear, I was told 3mm-5mm spacer on the rear drivers side should do the trick. In my experience the 5mm poked out slightly more than I needed it to, so I purchased a 3mm spacer and that should be arriving within a couple of days. I think it'll be more even so we'll see. As soon as I install the spacer I will post a pic!

[tadakun]

Originally Posted by TerenceCruz

That's right, due to the crooked torsion beam in the rear, I was told 3mm-5mm spacer on the rear drivers side should do the trick. In my experience the 5mm poked out slightly more than I needed it to, so I purchased a 3mm spacer and that should be arriving within a couple of days. I think it'll be more even so we'll see. As soon as I install the spacer I will post a pic!

Ah ok ok keep me updated. My buddy hooked me up with a guy in SoCal I think that supplied his custom spacers for he AVante Gardes. I'll def get some custom hub centric spacers shortly.