 |
 |
|
|
05-21-2016, 04:53 PM
|
#5 |
  Drives: 2015Yaris, Son's car, 10 Prius Join Date: May 2010
Location: Texas
Posts: 183
|
I did them today and it went quite well. Of course I lubed the caliper pins and they were in good shape anyway. Only small bit of rust on one pin which I knocked off easily. 14 mm socket and a 17mm wrench to hold the caliper pins. The Napa shoes came with shims and bracket hardware. 122,000 miles and yet there was still pad on the original brakes.
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: 60/40 Split Seat Install (some welding required) | CTScott | DIY / Maintenance / Service | 13 | 03-05-2017 04:12 PM |
| MI SSK In-Cabin DIY (Golddeenoh) | BEEF | DIY / Maintenance / Service | 5 | 03-26-2013 01:19 PM |
| Front Licence Plate | kimona | Cosmetic Modifications (Exterior/Interior) | 23 | 09-24-2010 07:20 PM |
| Question about bi amping front components. | YarisSedan | In Car Entertainment + Electronics (audio / video / alarm) | 6 | 08-28-2010 12:04 PM |
| Front brake pad replace: calipers piston | dslc | DIY / Maintenance / Service | 3 | 07-17-2010 02:46 PM |
Threaded Mode