Would these front suspension parts be any good?

[tmontague]

I can't remember what supplier it was. I went on eBay to look up control arms for the echo and found a good price and they happened to be Canadian.

The only other front suspension part that you could change (outside of your struts) would be your sway bar bushings. They're possible to access with a crazy long extension from behind the engine in the engine bay but they're not easy. They aren't known to wear so you may be better off to just leave your oem ones in.

I'll be changing mine when I do my 2zr swap but that's only because I'll have the engine out and it'll take all of 10 mins.

In terms of tightening up your suspension just replace all the control arms bushings/ball joint and your sway bar end links. That is assuming your struts are newer

If your steering is also loose then look into your inner and outer tie rods, you also have steering rack bushings which could be worn. That should be isolated to steering though. Have someone try and turn your steering wheel while you look behind the engine at the steering rack. You shoulnt see much play in it at all. Make sure the car is in the ground and not jacked up.