Rear bench delete finished.

[Pinchlite]

Originally Posted by hotracer_05

Currently working on something like this, any more pics?


Sent from my iPhone using Tapatalk

Those are the only pics I took.What exactly do you need help with?
Its so simple.I can take some more this weekend if you like.

Galvalized L brackets(Homedepot) screwed to floor,I used stubby hex head screws and had to drill larger holes into L breckets.Then mounted brackets to exsisting front flat parts on the bench suppports,used nut/bolt here.As you can see from pic I then used 2x3'S for cross members and again used large hex head screws.You just need to dry run everything and adjust accordingly for the depth/levelness of your top carpeted board.Once the top is on you can put the front skirt on.

I got carpet on Amazon and used 3M spray adhesive,cut wrapped board accordingly and stapled at back.

I cut and fit 6'' foam for underneath and the car is no louder then stock.

Very,very happy with how it looks and very sturdy,does not budge.

I left front part of stock bench support exposed purposely.Holds windex bottle,paper towel,etc upright perfectly.

P.S

I was not looking for more storage space or weight loss doing this mod but just wanted a nice clean looking totally flat hatch area.I suppose I lost some weight as the wood and L brackets dont weigh much.